How to setup TP-Link modem router for TM Streamyx

Setup TP-Link modem router for TM Streamyx

Setup TP-Link modem router for TM Streamyx

Here is a guide on how to setup TP-Link modem router for TM Streamyx. The most important thing is that you need to have a TP-Link modem router model that supports Streamyx in order for this tutorial to works for you. Modem router that suitable for Streamyx is the ADSL2+ type.

The modems that provided by TM are usually suck.  I use one before but after the second power surge incident at my house, it totally dead now. Currently, I’m using D-Link modem router which supports Unifi and Streamyx. If you happen to have a similar case and planning to buy a new modem router, I recommend you to buy either modem router from D-Link or TP-Link.

How to setup TP-Link modem router for TM Streamyx

  1. Connect TP-Link modem router with ADSL splitter through ADSL port found at the back of the modem router.
  2. Plug in the power adaptor and switch On the modem router by pressing the On/Off power button.
  3. Connect your laptop to the Wifi network using the default Wifi network name and password or connect through LAN1 port using cable.
  4. Open any internet browser and enter the following URL EXACTLY: http://192.168.1.1 or click here.
  5. Log in using the default username and password per following and select Login.
    • Username: admin
    • Password: admin
  6. From the menu on the left, select Quick Setup.
  7. In Quick Setup – Start page, select Next to continue.
  8. In Quick Setup – Operation mode page:
    1. Select ADSL Modem Router Mode.
    2. Select Next to continue.
  9. In Quick Setup – WAN Configurations page:
    1. In Country box, select Malaysia. It will automatically select Streamyx under ISP option.
    2. In PPP Username box, key in your Streamyx ID name (ex: xxx@streamyx). Call 100 if you are not sure about your Streamyx ID and password.
    3. In PPP Password box, key in your Streamyx password.
    4. Select Next to continue.
  10. In Quick Setup – Wireless Configuration page, tick Enable Wireless to use Wifi or you can select Skip Wi-Fi to continue using the default Wifi name and password.
    1. In Wireless Network Name box, key in your preferred Wifi name.
    2. In Network Authentication box, select WPA2-Personal.
    3. In Wireless Network Key box, key in your preferred Wifi password.
    4. Select Next to continue.
  11. In Quick Setup – Summary page, confirm your information and select Confirm to finish the setup.
  12. Done.

Note: The TP-Link modem router will take few seconds to reboot for the new changes to take effect.

Anyone using TP-Link modem router? What do you think about the quality of their product? Let me know in the comment below.

Share this post
More article like this
  • anuar m.noh

    Hi.after a few days I just buy a new stb, the problem just now Hypptv can log in “device exceeded user”,bagaimana nak unbind device mac address dlm streamyx (saya guna tp link spt diatas)

Barzrul Tech uses cookies to ensure you get the best experience while browsing the site.Read more >>
+