Learn how to change the maximum number of connections allowed to your TM Streamyx wireless network. You can configure to set to as many as you want as long as your router and network bandwidth able to support.
Theoretically, if 8 clients (devices) connected to 8Mbps network will get an average of 1Mbps per client. However, if some clients are not using the network, a router can shift the available bandwidth to the clients that need it.
Remember, if it is too many clients, your router can get overheat and might stop working when operating at extreme loads for extended periods.
Note: This guide is for TM Streamyx wireless G ADSL 2+ modem model Innacomm W3400V6. Different model should have slightly different configuration page. However, it will be very similar to each other.
How to change TM Streamyx wireless maximum connections
Step 1: Turn on your computer and TM Streamyx modem.
Step 2: Connect your computer to the wireless network or use LAN cable.
Step 3: Open any internet browser and enter the following URL exactly: http://192.168.1.1
Step 4: On the login page, key in your login detail. Below is the default:
- ID: tmadmin
- Password: Adm@XXXX
- or if fail, you can try “tmadmin” without ” “
- XXXX is the last 4 digit of your modem MAC id, you can find it on the sticker at the bottom of your modem and usually written on the router box by the service technician
Step 5: Once done, click “Login”.
Step 6: On the left-hand side menu, click “Wireless” then “Basic”.
Step 7: Find “Max Clients:” and look at the box on it’s right. Set your new max clients.
- By default, it was set at 16. This means the maximum number of devices can connect to the wireless network is 16.
Step 8: Click “Apply/Save” button to save the new configuration. Done!
I set it at 8 clients for my 8Mbps Streamyx package so it will be an average of 1Mbps for each device.